1.  Access the downloads needed from this page:  http://www.microsoft.com/windows/virtual-pc/download.aspx .  I installed the 2 updates, restarted and then installed XP mode.  This is not the order specified but it seems to work fine.

2.  After installing XP Mode you can choose to run it and proceed through some setup screens where you can set a password, configure updates…then choose Start Setup

3.  You end up with a preconfigured Windows XP virtual machine.

4.  By default networking is setup to use shared NAT networking.  This will get you to the internet but may not allow browsing to your internal network.

5.  You can switch how networking works by going to Tools, Settings, Networking, and selecting your Network adapter.  After a few seconds you’ll get an ip address from your DHCP server provided you have one.

Installing and using applications

1.  Install the application in the XP Mode virtual machine.

2.  Log off the virtual machine.

3.  Go to Start, All Programs, Windows Virtual PC, Windows XP Mode Applications, choose the application you just installed.  Note:  If the application is not listed open  XP Mode and create a shortcut to the application in the c:\documents and settings\ all users\ start menu folder, shutdown and check if it is listed.

Opening the application

Powerpoint 2007 with Adobe Presenter in XP Mode, a seemless window:

The event log has an error:

Event ID 9554: Unable to update Mailbox SD in the DS. Mailbox Guid: f83fade5-8dc0-4f58-96bb-f5fd00b6e7c4. Error Code 0x8004010f

If you know the user this should work otherwise find the user by following this kb article to find it:  http://support.microsoft.com/kb/555433

First remove full mailbox access rights to the mailbox using the Exchange Management console.

In my case the mailboxes I was trying to give access to were in the Users OU and it was not allowing the permissions to inherit.  I moved the mailboxes to an another OU that did allow permissions to inherit and then added full mailbox access permissions back and that solved the issue.

The issue was the Comcast modem was handing out an IP address in the same range that the router uses for the internal LAN ie my home wireless network. Comcast gives an address in the 192.168.0.x network which is the same IP address range the Dlink uses by default. To remedy connect a lan cable from a computer to one of the ports on the router but not the internet or WAN port. Login to the router by opening a web browser to 192.168.0.1 and go to the Network Settings page. Change the IP address to another subnet such as 192.168.10.1, reboot the router. Now shut down the router and the modem, connect the lan cable from the modem to the internet port of the router, start the modem and wait 30-60 seconds, then start the router, now connect a PC and you should be in business.

1. Shut down the virtual machine.
2. Edit the disk you want to expand using the Vmware client, edit the disk and increase the size.
3. Boot the virtual machines into Windows, go to disk management and verify the unallocated disk space is available.
4. You won’t be able to extend the volume if its the boot volume so you’ll need a partition manager to extend the disk.
5. Download the GParted open source partition manager Live CD, mount the iso and boot the virtual machine from it, then extend the disk and boot into Windows.

I believe in Windows 2008 you can do all this from within Windows but haven’t had to test that yet.

This was resolved by running the conversion again.  During the conversion wizard select devices and change the default disk controller to SCSI Bus Logic.  Run the conversion and boot the virtual machine.

What you’ll need to make the Restore easier:

• A backup of your Sharepoint farm made with Symantec BackupExec
• A list of your web applications and associated databases
• The build version of the farm
• A list of domain service accounts
• MOSS 2007 install media and key.

1. Install Windows, updates, IIS basically everything needed for a base install.
2. Install the BackupExec agent.
3. Add any domain service accounts to local admins group.
4. Install MOSS 2007.  You need to also install any updates as well.  In my case I needed to install the WSS Sp1 update an then MOSS SP1.  If you try the restore to a different build number it won’t work in most cases.
5. Install SQL.
6. Run the Sharepoint Products and Technologies wizard.  Create a new farm.
7. Configure Sharepoint – This is  a good general overview of installing and configuring Sharepoint – http://blogs.msdn.com/martinkearn/archive/2007/03/28/how-to-install-sharepoint-server-2007-on-a-single-machine.aspx
8. On the Symantec server, go to restore, view by resource, browse to your old server and farm, check off the portal database.
9. Go to the MS Sharepoint Redirection, choose redirect Microsoft Sharepoint sets, enter your Portal url and server name.

Copy the x86 drivers to a machine running Windows XP x86 or whichever OS you are trying to upload to the print server.  Browse to the server by going to \\servername, open the printers and faxes folder, highlight the printer, go to file,  server properties, drivers tab, add and browse to the location of the x86 drivers.  This makes the drivers available on the server and any machines connecting will be able to automatically download the correct driver.

I used Quest’s Powergui with the Exchange 2007 powerpack to do this – http://www.powergui.org/index.jspa.  Its free and a great tool if you don’t have it yet you should look into getting it.  Open Powergui, expand Exchange 2007, Client Access, User Configuration.  A list of the users will display in the middle, right click on the column header and check off PopEnabled and ImapEnabled.  You can now see which users are enabled and disabled.  You can also sort by any column by clicking the header.

You can setup a filter that will automatically show you only users that are POP3 enabled or IMAP4 enabled.  Click User Configuration then click the Filters button in the middle pane.  Click the drop down arrows and set them to  Property = ImapEnabled, Operator = Equal, Value = True.  You can save the Filter by clicking Save As entering a name and clicking OK.  A new script will appear under the User Configuration node which will automatically display only users with IMAP4 enabled.  You can do the same for POP3. 

Once you determine what users are enabled for IMAP4 or POP3 you’ll want to find out which users are actually accessing the server using the protocols so you can disable any that are not.  To enabled IMAP4 or POP3 protocol follow these instructions by Microssoft:

http://technet.microsoft.com/en-us/library/aa997690.aspx

Restart the service after making the change.

Once enabled you can use a tool like Logparser or if you only have a handful of users that are using IMAP/POP like I did just go to the log files and search it for their username.  You might want to search the log everyday for a few days before disabling IMAP/POP on the user accounts just to make sure they aren’t using it.

Imap logs are normally located here:  C:\Program Files\Microsoft\Exchange Server\Logging\Imap4 

You can open with notepad and search for the username.

This message comes up as a result of the active partition being set to boot from the built-in recovery partition on the hard drive.  Most Lenovo laptops come with a hidden recovery partition used for the rescue and recovery software.  To fix the issue get a bootable floppy disk or usb drive with fdisk.  Boot from the device and use Fdisk to set the proper mark the proper partition as active then run fdisk /mbr and restart.  You could also use a Ghost 2003 cd and run gdisk which is their version of fdisk.  Run gdisk 1 /act /pri:1 assuming you want partition 1 to be the active, bootable partition.

Boot to ghost 2003 cd\support gdisk, gdisk 1 /act /pri:1 to set the first partition as the active one or use fdisk and set partition 1 to active and run fdisk /mbr